Search results for
All Products
Relevant Product Categories
Fits WGO Boilers Series 3
Includes: (4) 1/4 by 1-1/4 Bolts, (4) Nuts, (4) Washers, and (4) Tinnerman Nuts
Fits GV Series 1 and 2 Gas Boilers
Includes: Negative Regulation Gas Valve, Left Hand Thread Adapter for Outlet
Hand Valve, Mounting Bracket, 12 VDC, Wiring Harness with 24 VAC to 19-21 VDC Rectifier
Honeywell Part Number: VK8115V-1178
Overview
Weil McLain high quality oil boilers feature long lasting cast iron sections and easy to use controls that optimize operation and comfort, while maximizing energy savings. The Weil McLain SGO series does not include a tankless coil, but does include a tankless opening cover plate with each boiler.There are rear and top flue outlets for complete venting flexibility.
Features
- Minimum chimney requirement: 7 inch diameter x 15 feet high
- Tankless coil is not included, but the boiler does include a tankless opening cover plate. A tankless coil and controls are optional
- Swing away burner door
- Refractory blanket and target wall in combustion area
- Quick opening top jacket for easy cleaning access
- Insulated steel jacket
- Water content: 14.2 gallons
- Aluminized steel flue collector hood with flue cap on top outlet (convertible to rear outlet)
Fits GV series 3 and 4
Honeywell Part Number: VR8304M-4002
Fits CGi 7 Boiler Series 1
Fits Ultra 155 Series 1 and Series 2 Gas Boilers
Old Number 383-500-070
Includes:
- Heat Exchanger
- Cover Plate
- Burner
- Electrode
- Water Sensors
- Compression Fittings
- Condensate Fitting
- Gaskets
- Hardware
Overview
Weil McLain takes condensing boiler technology to a higher level of performance. The Ultra Series 4 features a state of the art heat exchanger with nanotechnology coating that works like "Ultra Armor", reducing build up in the heat exchanger while maintaining high efficiency. Nanotechnology is a heat exchanger coating that combines anti-adhesive and anti-corrosion properties, which protects the heat exchanger from corrosion and combustion residue build up. In conventional systems, aggressive exhaust particles can attach to the surface and cause heat exchangers to corrode. Heat transfer is then reduced and the heating system's energy efficiency decreases. With nanotechnology properties, biofilm formation is inhibited and allows residues to be easily carried out of the heat exchanger before they obstruct the flueways. In addition, Ultra Series 4 has an advanced condensate management system that incorporates polypropylene piping to further reduce the impact of condensate. Thanks to our nano-coated heat exchanger, the Ultra Series 4 requires no cleaning for a full five years after installation. When it's time to clean, a simple rinsing of the coated heat exchanger with water does the trick. The Ultra Series 4 is an ideal choice for single family residential applications. Homeowners will appreciate its quiet operation, ease of set up and control, and unmatched comfort while providing immediate payback in energy savings. For light commercial applications, the Ultra Series 4 lets contractors pair boilers in sequence to heat larger buildings. And, it allows you to control multiple boilers from a single control panel. Back-lit LCD display and simple programming buttons make entering and receiving information easy. The homeowner has the ability to view current boiler status, check water and outdoor temperatures, review boiler maintenance schedule and view installing contractor contact information.
Features
- Includes an LP gas orifice for conversion
- 31,000 BTU minimum input - 155,000 BTU maximum input
- 3 inch PVC, CPVC, Polypropylene or Stainless Steel vent pipe
- Cast aluminum block with nanotechnology coating
- Stainless steel burners
- Variable speed blower assembly
- Venturi mixing system with air silencer
- Direct spark ignition
- Water content: 1.17 gallons
- Fully removable jacket front
- Adjustable boiler legs
- Condensate trap with drain tee assembly
- U-Control Module with 3.5 inch LCD display
Old Number 386-901-000 and 386-901-003
Fits Ultra Oil UO-3E
Old Number 10C189
Fits CG and CGM Boilers Series 9 and 10
Beckett Part Number: E38A1
Fits 588, 688, 888, 988, 1188, 1288, 1488, 1588, 1788, and 1888
Fits 488, 688, 788, 888, 1088, 1288, 1388, 1488, 1588, 1688, 1788, and 1888
Overview
This boiler is packaged, wired and assembled at the factory. Cast iron sections for better heat transfer. Includes an automatic vent damper for higher efficiencies and reduced fuel consumption. Easy to access controls for easy servicing.
Features
- Intermittent electronic ignition system with UCM universal ignition control module
- Insulated extended jacket
- Horizontal to vertical draft hood
- Automatic vent damper
- Non-linting pilot burner
- Two 3 inch female supply tappings
- Two 2-1/2 inch female return tappings
- Stainless steel burners
- Electrode type low water cutoff
- Gauge glass and valves
Old number 10C665
Fits CGi series 1 - Includes Inducer fan assembly, gasket, and nuts
Fits CGt series 1 and 2 - Includes: pilot assembly, LP orifice, tubing, sparker, and sensor
Fits EVG-399 - Includes: flame sense rod, flame sense gasket, ignitor, ignitor gasket, venturi gasket, burner gasket, cover plate gasket, venturi gas vale "O" ring, refractory, silicone, inhibitor test kit, burner access cover seal, and hardware
Overview
Weil McLain high quality oil boilers feature long lasting cast iron sections and easy to use controls that optimize operation and comfort, while maximizing energy savings. The Weil McLain WTGO series has a high capacity, high efficiency tankless heater included with each boiler.There are rear and top flue outlets for complete venting flexibility.
Features
- Minimum chimney requirement: 7 inch diameter x 15 feet high
- Tankless coil: 4.00 gallons per minute intermittent draw rating when heated from 40 degrees to 140 degrees with 200 degree boiler water
- Swing away burner door
- Refractory blanket and target wall in combustion area
- Insulated steel jacket
- Water content: 15.9 gallons
- Aluminized steel flue collector hood with flue cap on top outlet (convertible to rear outlet)
Overview
Cast iron sections for better heat transfer and a compact design to save valuable living space. Easily accessible controls, vertical flueways and top cleaning for easy and quick servicing
Features
- Can be installed with atmospheric venting using a chimney; flue size 5 inch
- Can be installed with direct venting using AL29-4C stainless steel vent pipe; flue size 3 inch
- Integrated boiler control module with intermittent electronic ignition system with integrated indicator and diagnostic lights
- Draft inducer assembly with cover
- Water content: 2.7 gallons
- Integrated low water cutoff with test button
- Insulated extended steel jacket
- Two piece top jacket panel
- Cast iron sections with built in air separator
- Stainless steel burners
- Non-linting pilot burner
Overview
Cast iron sections for better heat transfer and a compact design to save valuable living space. Easily accessible controls, vertical flueways and top cleaning for easy and quick servicing
Features
- Can be installed with atmospheric venting using a chimney; flue size 4 inch
- Can be installed with direct venting using AL29-4C stainless steel vent pipe; flue size 3 inch
- Integrated boiler control module with intermittent electronic ignition system with integrated indicator and diagnostic lights
- Draft inducer assembly with cover
- Water content: 1.5 gallons
- Integrated low water cutoff with test button
- Insulated extended steel jacket
- Two piece top jacket panel
- Cast iron sections with built in air separator
- Stainless steel burners
- Non-linting pilot burner
Fits BL-588-W and BL-588-S through BL-788-W and BL-788-S with Beckett CF-2300A Oil Burner
Fits BL-888-W and BL-888-S through BL-1188-W and BL-1188-S with Beckett CF-2500 Oil Burner
Fits BG-488R-W, BG-488R-S, BG-488-W, and BG-488-S with Beckett CG10.6S Gas Burner
Fits Ultra Series 3 155 and 230, 3UE 155 and 230, and 3-CT 155 and 230
Includes: Condensate Trap, Hose Clamps, PVC Fittings, and Gasket
Fits CGi 6 and 8 Boilers Series 2
Tri-Delta Part Number: PPS10171-3096
Old Number 512-200-029 and 10B864
Fits EG Boilers Series 1 Through 5