This 4 x 5 inch copper float is used with a float valve in a control assembly that provides make up water for pressure washers, cooling towers, heat transfer units, livestock watering tanks, and refrigeration units. This float is made of high grade copper with firmly bonded overlapping joints and has a 1/4-20 female thread connection. The maximum working temperature is 200 degrees F.
Search results for
All Products
1,090
products found manufactured by Watts
Relevant Product Categories
Fits 1-1/4 inch LF5, 1-1/4 inch LFU5, 1-1/4 inch LFU5B, and 1-1/4 inch LF223
This lead free repair kit includes all the parts needed to repair a lead free high performance water pressure reducing valve and used in commercial, industrial and residential applications. This kit consists of a seat, seat gasket, disc, disc screw, strainer plug gasket, strainer screen, bottom plug gasket, diaphragm and union gasket.
Fits 2 inch LF5, 2 inch LFU5, and 2 inch LFU5B
This lead free repair kit includes all the parts needed to repair a lead free high performance water pressure reducing valve used in commercial, industrial, and residential applications. This kit consists of a seat, seat gasket, disc, disc screw, strainer plug gasket, strainer screen, bottom plug gasket, diaphram, and union gasket.
This super capacity lead free water pressure reducing valve is commonly installed at the meter in residential, commercial and industrial buildings. It is designed to control the water pressure flowing to all the appliances and outlets within the building and provides an inexpensive means of supplying lower, more functional water pressure to outlets and appliances. It features a lead free brass body construction, bypass to control thermal expansion pressure, NPT threaded female inlet and outlet connections, high temperature resisting enlarged diaphragm for hot or cold temperatures, a sealed spring cage and seat orifice for super capacity performance. This valve can be used for accessible outdoor waterworks or pit installations. The adjustable reduced pressure range is 25 to 75 psi
Fits 2-1/2 inch LF009, 3 inch LF009, 2-1/2 inch 009, and 3 inch 009
This total rubber parts kit is used for replacing or repairing the relief valve assembly on a lead free reduced pressure backflow assembly used to prevent the reverse flow of polluted water from entering into the potable water supply due tobacksiphonage and or backpressure. This kit consists of a diaphragm, two molded disc assemblies, two seat O-rings, RV O-ring, two piston O-rings, RV stem O-ring, flow tube O-ring and cover O-ring.
This 3/4 inch lead free temperature and pressure relief valve is designed to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 105,000 BTU/hr. This two-in-one relief valve provides a proven and cost effective means to protect against excessive temperature and pressure emergency conditions. It features a lead free copper alloy body with extended shank to accommodated up to 2 IN of insulation, NPT male inlet and NPT female outlet connections, a unique thermostat with special thermo-bonded coating, stainless steel spring, and test lever. The temperature relief is 210 degrees F (99 degrees C) and the pressure relief is set at 150 psi
Fits 2-1/2 inch 909RPDA and 3 inch 909RPDA
This first check repair kit is used for replacing or repairing the first check on a reduced pressure backflow assembly used to prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure. This kit consists of the disc and spring assembly, cover O-ring and lubricant.
This 1 inch hydronic package kit is used for commercial and residential closed loop hydronic heating systems. It includes a micro-bubble air separator, system purge valve with swivel flange for connection to the air separator, boiler fill fitting, system expansion tank and fill valve with backflow device. This package provides an economical solution for buying boiler components that make boiler piping simple and service to your system easy
Fits 1/2 inch 9DM2
Consists of Diaphragm Assembly, Disc Assembly, Seat, Seat O-Ring And Two Union Seals
Fits 3/4 inch 009, 3/4 inch 007, 1 inch 009, and 1 inch 007
Fits 2-1/2 inch LF909, 3 inch LF909, 2-1/2 inch 909, and 3 inch 909
This repair kit is for the replacement of the lead free backflow preventer relief valve. It consists of a diaphragm, disc, molded disc assembly, piston O-ring, stem O-ring and cover O-ring.
This 1 inch lead free master mixing valve is designed for use in commercial and institutional applications, to mix hot and cold water to reduce high service water temperature to the building distribution piping system. It is designed for installation at the hot water source. It features a lead free brass body construction, a copper paraffin thermostat assembly and a lockable temperature adjustment for increased safety. Polysulfone internals resist excessive heat, liming and corrosion, and a single-seat design ensures tight shut off in the event of cold water supply loss. Listed to ASSE 1017 and IAPMO cUPC in compliance with CSA B125.3. The temperature range is 90 to 180 degrees F (32 to 82 degrees C) and the maximum pressure is 125 psi.
This stainless steel manifold with 7 circuits is made of heavy-walled stainless steel and designed for radiant heating and snow melting application with water or water/glycol solutions. Standard features include flow balancing valves and flow meters on each circuit. Manifolds are sold in pre-mounted pairs. The manifold has a maximum operating pressure of 87 psi at 167 degrees F.
This 3/4 inch standard duty mechanical float valve is used in commercial, industrial, and agricultural applications for controlling water flow. It is ideal for use in air conditioning, refrigeration, and irrigation systems. This valve has a bronze body with 3/4 inch male NPT threaded inlet and outlet connections, cotter pin pivot arm assembly, and plunger assembly with seals. The maximum pressure is 125 psi
This boiler pressure relief valve is used in hot water heating and domestic supply boiler applications to protect against excessive pressures on all types of hot water heating supply boiler equipment. It consists of a bronze body construction with NPT threaded female inlet and NPT threaded female outlet (drain) connections, non-metallic disc-to-metal seating, stainless steel spring, and test lever. It resists corrosive water conditions, sticking and freezing, and prevents water and sediment from being trapped in the seat. It is designed for emergency safety relief, not as an operating control. The pressure relief is set at 100 psi
This 3/4 inch bronze automatic reseating temperature and pressure relief valve with a 1 21/32 inch extended shank and 3 1/2 inch thermostat is installed directly in tank tappings and is used in commercial applications to provide automatic temperature and pressure protection for hot water supply tanks and hot water heaters. It features a bronze body with NPT male inlet and NPT female outlet connections, thermo-bonded coated thermostat, tamper resistant bonnet screws, automatic reseating feature, Non-mechanical seat to disc alignment and test lever. The temperature relief is 210 degrees F (99 degrees C) and the relief pressure is 150 psi.
This stainless steel manifold coupling is used to connect two manifold pairs. The couplings are nickel-plated for corrosion resistance.
48 square feet - 120 volts - 5 amps
Individual circuit flow with balance valves - Mounted on bracket - Circuit isolation valve
For stainless steel manifolds only - 0 to 2 GPM
Fits 3/4 inch 825Y, 1 inch 825Y, and 1-1/4 inch 825Y
This relief valve repair kit includes the parts necessary to repair or replace the relief valve of a reduced pressure backflow assembly. All parts are genuine and original to the valve.
This temperature and pressure relief valve is designed to provide automatic temperature and pressure protection to hot water supply tanks and hot water heaters up to 15,000 BTU per hour. This two in one relief valve provides the most proven and cost effective means to protect against excessive temperature and pressure emergency conditions. It features a bronze body construction, NPT male inlet and NPT female outlet connections, a unique entended thermostat with special thermo-bonded coating and test lever. The temperature relief is 210 degrees (99 degrees C) and the pressure relief is set at 150 psi
Fits 1-1/4 inch LF009M1, 1-1/2 inch LF009M1, 2 inch LF009M1, 1-1/4 inch 009M1, 1-1/2 inch 009M1, and 2 inch 009M1
This second check repair kit provides all the parts necessary to replace the major internal components of the applicable reduced pressure backflow assembly. The check kit consists of the second check assembly, cover O-ring, and sensing passage O-ring. All parts are genuine and original to the valve.
Old Number N45BG1
Adjustable from 25 to 75 PSI - Includes bypass, strainer, calibrated outlet serviceable inline, thermoplastic seat and cage, gauge tapping, female connections
This 6 inch plastic float is used with a float valve in a control assembly that provides make up water for pressure washers, cooling towers, heat transfer units, livestock watering tanks, and refrigeration units. This float is made of all injection molded polyethylene construction, non-electrolytic and highly corrosion resistant and has a 1/4-20 female thread connection. The maximum working temperature is 140 degrees F.
This pressure relief valve is used in residential applications to protect against excessive pressure on domestic storage tanks and tankless water heaters. It consists of a brass body construction with NPT threaded male inlet and NPT threaded female (drain) outlet, test lever, and stainless steel spring. It is ANSI Z21.22 approved, ASME rated and design certified and listed by CSA. The pressure relief is set at 150 psi
This 3/4 inch flow measurement valve monitors system flow in low to medium flow rate HVAC units, providing a highly accurate flow measurement. It consists of bronze body construction with bi-directional, positive shutoff ball valve design, blow-out proof stem, a position indicator, memory device, checked metering ports with drip caps, two brass pressure taps, integral drain ports, solder connections, and a brass drain plug. It has a compact size which allows for easy installation and access in a crowded piping environment. It is ideal in hot/chilled water units such as fan coil units, water source heat pumps, reheat coils, panel coils, small branch lines, unit heaters, unit ventilators, finned radiation, small domestic hot water lines, convectors, and small pumps.
This 1/2 inch Maxi-Flo check valve is used in general industrial and plumbing applications to prevent the effects of water hammer in the piping system. It provides a silent operation with low pressure drop and can be installed horizontally or vertically. This valve consists of a brass body, brass check and adapter, Viton disc, and soldered end connections. The maximum pressure rating is 400 psi, WOG non-shock at 100 degrees F
Fits 1 inch LF009M2 and 1 inch 009M2
This total rubber parts replacement kit is used for repairing the parts to the relief valve to prevent the reverse flow of polluted water from entering into the potable water supply due to backsiphonage and or backpressure. This kit consists of a diaphragm, two discs, two disc assemblies, stem O-rings, cover O-ring, two seat O-rings and RV seat O-ring.
Oxygen barrier tubing for radiant heating, snow melting, and supply and return piping
Fits 1/4 inch LF009, 3/8 inch LF009, 1/2 inch LF009, 1/4 inch 009, 3/8 inch 009, and 1/2 inch 009
This first check repair kit provides all the parts necessary to replace the major internal components of the applicable reduced pressure backflow assembly. The check kit consists of the check assembly and cover O-ring. All parts are genuine and original to the valve.
Fits 1-1/4 inch 009, 1-1/2 inch 009, and 2 inch 009
This second check repair kit provides all the parts necessary to repair major internal components of this reduced pressure backflow assembly. This kit consists of a second check assembly, cover O-ring, and sensing passage O-ring. All parts are genuine and original to the valve.
Fits 1/4 inch 188, 1/4 inch LF288, 1/4 inch 288, 1/4 inch LF388, 1/4 inch 388, 3/8 inch 188, 3/8 inch LF288, 3/8 inch 288, 3/8 inch LF388, and 3/8 inch 388
This anti-siphon vacuum breaker hot or cold water repair kit prevents the reverse flow of polluted water from entering into the potable water supply due to backsiphonage. It consists of a disk and disc float, a bonnet and O-ring. It has a full size orifice to assure pipe size capacity and maximum flow. It is ideal for low flow, non-continuous hot or cold water health hazard installations such as on laboratory equipment. Maximum Pressure is 125psi
This 3 inch swing check valve is used to prevent reverse flow in water and steam applications. It features a brass body with NPT threaded end connections, lead free brass bonnet, PTFE gasket, lead free brass pin, screw and seat. This valve has metal-to-metal seating and provides low pressure drop and automatic closure when fluid flow is stopped.
Oxygen barrier tubing for radiant heating, snow melting, and supply and return piping